Solution To iPhone Earphone Adapter Problem
July 10th, 2007 From: John
Subject: solution to iPhone earphone adapter problem
Found this online, just tried it, and it works great:
If you are frustrated that your sweet High End headphones don’t work in the iPhone’s jack, go out to Radio Shack and get a 12 inch long 3.5mm (1/8th inch) stereo jack cable that has the in line volume control - I bought mine a while ago but they can’t be more than 5-10 bucks. Shave off just enough of the black plastic at the male end (that goes into your headphone jack) to make it fit, and voila - you have an adapter that sounds great, has a built in volume adjustment so you can leave your iPhone in your pocket, it’s cheap, and you don’t have to cut up your actual headphones, possibly voiding their warranty.
Posted by phototravel on July 3, 2007 at 10:42 AM (PDT)
Here is my write-up of having done this:
Okay, Phototravel, you are BRILLIANT. I just went to the local Radio Shack after going to their web site - you can check if products are in stock at your local store via the Web. I found out online that the product is Model: 42-2559, “Volume Control headphone extension cord”. It’s $7.99, small as can be (which is great). Got it home, was scared to death to cut into it, did it anyway with a pair of box cutters. They cut the black rubber very easily. You need to cut only a thin sliver of the rubber off, but you need to cut into the base of the rubber, not just the thin rim that touches the metal. But seriously, just cut a thin sliver, and try it. If it doesn’t work yet, cut a tiny bit more. Mine worked the first time. And when you cut the rubber, so long as you don’t move too far down the plug, you’re only cutting rubber, there’s nothing electronic for you to hit (and the things are only 8 bucks). It works PERFECTLY and isn’t hideous at all, unlike the Belkin adapter (which is out of stock) - and you get the volume control. Thank you thank you thank you for this tip.
—
Note from Tony - The following tip only works if your car has a built-in cassette player:
I bought the $9.95 Belkin plug adapter for my car’s $13 cassette adapter that I used with my old iPod for listening to audiobooks on my car stereo. Oddly enough, these two cheapo accessories allow me to use my car’s stereo as part of a hands-free phone system.
I just leave the iPhone plugged in to the cassette adapter and play my audiobooks through the stereo. Then, as I’m driving, the sound will die down, which warns me that the phone is about to ring. When it does, I press the necessary controls on the phone to answer, and then leave the iPhone in my car’s cupholder between the front seats.
The person at the other end DOES get a bit of an echo on their end, but I can hear the folks on the other end just dandy through my car’s stereo system. They can understand me just fine!



